Statkraft, Siemens to build 430MW Knapsack II CCGT plant in Germany

Source: Statkraft

Statkraft, Europe's leader in renewable energy, and Siemens signed an EPC contract on the power plant project Knapsack II near Cologne in Germany. 

The Norwegian energy generator is planning the construction of one of the world’s most modern gas and steam combining power plants with a production capacity of 430 MW at the chemical industry park Knapsack. The recently signed EPC contract (Engineering, Procurement and Construction) contains regulations for the supply and the construction of the plant through Siemens if the building permit is granted and construction finally decided. 

“This agreement with Siemens is a major contractual step on the way to the final go”, explains Asbjørn Grundt, Executive Vice President, Market Operations and IT. Requirement for such a decision and for all further steps is the approval of the construction permission, which is expected to be completed by mid 2011.

Siemens combined cycle power plants based on F Class gas turbine technology are the most eco-friendly fossil-fueled power plants attaining efficiency levels of over 59 percent. With our concept for fast-start combined cycle power plants offering fast load cycling and high efficiency levels Siemens provide solutions that optimally supplement the increasing share of renewables in the energy mix."

The approval procedure for the required gas connection will begin in September. To supply the planned power plant with gas, a 13 km long gas pipeline has to be installed which allows a connection to the already existing high pressure pipeline “Stolberg-Porz” of E.ON gas transportation.

The power produced in Knapsack II will be fed into the high voltage grid of Amprion GmbH through an underground cable near the power plant. Water supply and several other site services is provided by the site operator InfraServ which has strongly been integrated into the planning process.

Statkraft has already been operating a gas and steam combined power plant with a capacity of 800 megawatt at the location of Knapsack since 2007.

“The expansion of our power plant capacity is an important strategic goal”, explains Asbjørn Grundt. “Gas power plants are low in emissions and due to their flexibility also work perfectly in conjunction with volatile renewable production. Therefore, gas power is an important technology for the expansion of renewable energy in Germany and Europe.”

Statkraft is Europe's leader in renewable energy. The Group develops and produces hydropower, wind power, gas power and district heating, and is a major player on the European energy exchanges.



Did You Like this Article? Get All the Energy Industry News Delivered to Your Inbox

Subscribe to an email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Whitepapers

Maximizing Operational Excellence

In a recent survey conducted by PennEnergy Research, 70% of surveyed energy industry professional...

Leveraging the Power of Information in the Energy Industry

Information Governance is about more than compliance. It’s about using your information to drive ...

Reduce Engineering Project Complexity

Engineering document management presents unique and complex challenges. A solution based in Enter...

Revolutionizing Asset Management in the Electric Power Industry

With the arrival of the Industrial Internet of Things, data is growing and becoming more accessib...

Latest PennEnergy Jobs

PennEnergy Oil & Gas Jobs