Restarting Belgian nuclear plants could be "catastrophic" warns study

By Kelvin Ross, Deputy Editor, Power Engineering International

To restart two Belgian nuclear power plants which have been shut since the discovery of cracks in their reactor vessels could have “catastrophic consequences”, according to a new study.

The study claims to have found indications of radiation embrittlement of the reactor pressure vessel at Doel-3 plant, near Antwerp.

On Jan. 10, Belgian Green MP Kristof Calvo told a press conference at the European Parliament: “If you have these problems in Belgium, all the other reactors [in Europe] should be checked for the same defects.”

Doel-3, along with Tihange power plant near Liege, was shut last August when Belgium’s nuclear regulator said that problems in its construction had caused a “malaise” with a large number of non-hazardous defects.

Belgium’s nuclear safety authority is expected to give the two plants a clean bill of health in a report to the Belgian government on 15 January, but no official decision on their future has yet been taken.

But the new study, commissioned by the Green Party group in the European Parliament and written by consultant Ilse Tweer, states: “A possible failure of the reactor due to sudden crack growth in case of local thermal stresses cannot be excluded and would have catastrophic consequences, especially in the vicinity of densely populated and high-economic activity areas.”

“If a melted reactor core reached the lower plenum area where steam explosions are entrained, it would sooner or later cause containment failure with the consequence of severe radioactive releases to the environment.”

This article originally appeard on Power Engineering International. It was republished with permission.

Did You Like this Article? Get All the Energy Industry News Delivered to Your Inbox

Subscribe to an email newsletter today at no cost and receive the latest news and information.

 Subscribe Now


Logistics Risk Management in the Transformer Industry

Transformers often are shipped thousands of miles, involving multiple handoffs,and more than a do...

Secrets of Barco UniSee Mount Revealed

Last year Barco introduced UniSee, a revolutionary large-scale visualization platform designed to...

The Time is Right for Optimum Reliability: Capital-Intensive Industries and Asset Performance Management

Imagine a plant that is no longer at risk of a random shutdown. Imagine not worrying about losing...

Going Digital: The New Normal in Oil & Gas

In this whitepaper you will learn how Keystone Engineering, ONGC, and Saipem are using software t...