OE 2015: Lloyd’s Register Energy to discuss EU offshore safety directive

Offshore staff

ABERDEEN, UK – At Offshore Europe 2015, Lloyd’s Register Energy will help companies understand the requirements and the pathways to compliance of EU Directive 2013/30/EU.

On July 19, 2015, the Offshore Installations (Offshore Safety Directive) (Safety Case, etc.) Regulations 2015 (SCR) came into force in the UK.

The past three decades have seen several major offshore disasters. The EU Directive 2013/30/EU, which was introduced into national regulations in EU member states, aims to minimize the risk of such accidents and limit their consequences, while tackling the problem of fragmented regulation throughout the EU.

On Wednesday, Ian Mackay, technical manager of Compliance Operations, will give an overview of the risks and opportunities associated with the implementation - and what help is available.

“The main aim of SCR is to reduce the risks from major accident hazards to the health and safety of those employed on offshore installations. It also aims to increase the protection of the marine environment against pollution and ensure the correct mechanisms are in place if such an event were to happen,” said Mackay.

“Lloyd’s Register was involved with the UK government technical committee which formulated the UK Safety Case Regulations in the early 90s. We have remained one of the major providers of safety case verification services in the North Sea,” explained Mackay, “We want to share our knowledge and experience with ministries and newly formed competent authorities, not just in the UK but in all affected states.”

Ian Thomas, department manager of Consulting Operations in Aberdeen, will present on the required verification schemes for Safety and Environmentally Critical Elements (SECEs), which in the UK are addressed via SCR.

Thomas said: “The requirement to include environmentally critical elements within the verification scheme is already promoting much debate and is seen to be driving innovation. For example, environmental practitioners are now starting to apply techniques common to safety specialists such as Bow Tie studies to achieve a more systematic and objective method for the identification and management of the ‘environmental component’ of Safety and Environmentally Critical Elements and Performance Standards.”

The directive is a goal setting regime largely based on the UK Safety Case model. For some, this regime will be unfamiliar but even UK operators will be required to modify existing arrangements and provide additional documentation.

Mackay and Thomas will be speaking on Wednesday, Sept. 9, at 10:45 a.m. in Room 2 at the Aberdeen Exhibition and Conference Centre (Red Zone, 1st floor).

Did You Like this Article? Get All the Energy Industry News Delivered to Your Inbox

Subscribe to an email newsletter today at no cost and receive the latest news and information.

 Subscribe Now


The Time is Right for Optimum Reliability: Capital-Intensive Industries and Asset Performance Management

Imagine a plant that is no longer at risk of a random shutdown. Imagine not worrying about losing...

Going Digital: The New Normal in Oil & Gas

In this whitepaper you will learn how Keystone Engineering, ONGC, and Saipem are using software t...

Maximizing Operational Excellence

In a recent survey conducted by PennEnergy Research, 70% of surveyed energy industry professional...

Leveraging the Power of Information in the Energy Industry

Information Governance is about more than compliance. It’s about using your information to drive ...