Interconnect filed for revived New York power plant unit

Greenidge power plant

The New York Independent System Operator and New York State Electric & Gas on Nov. 15 filed with the Federal Energy Regulatory Commission an executed Large Generator Interconnection Agreement with Greenidge Generation covering the revival on natural gas and biomass of the coal-fired Greenidge Unit 4.

Greenidge is restarting Unit 4 of the Greenidge plant in Dresden, New York. It will have a net output of 106.3 MW. The facility will interconnect to certain transmission facilities of NYSEG that are part of the New York State Transmission System. The Point of Interconnection is the point where NYSEG’s 115-kV cable circuit from its Isolating Switch B4-76 connects to the existing NYSEG 115-kV Greenidge Substation between Switch B4-74 and B4-78.

This unit is a single turbine Rankin cycle generating facility with a nameplate capacity (gross) of 112.5 MW. The estimated net output is 106.3 MW summer/106.3 MW winter. The targeted commercial operation start is in February 2017.

In prior developments for this project:

·      The New York State Public Service Commission on Sept. 16 approved an October 2015 application from Greenidge Pipeline LLC and Greenidge Pipeline Properties Corp. for a Certificate of Environmental Compatibility and Public Need on a new gas pipeline to support this coal-to-gas conversion a Greenidge.

·      The tap would be on National Fuel Gas Co.’s Empire Connector in the Town of Milo, Yates County, and the transmission line will provide gas to the Greenidge generating facility in the rown of Torrey, Yates County.

The commission order added: "The Pipeline Companies state that the Pipeline is needed to deliver natural gas to the Greenidge Power Plant, a 106.4 MW generating station owned by Greenidge Generation LLC (Generation), an affiliate of the Pipeline Companies. The Greenidge Power Plant was originally constructed by New York State Electric and Gas Corporation (NYSEG) in 1953 and operated primarily on coal until it was placed into protective lay-up in 2011. As part of its efforts to resume operation of the Greenidge Power Plant, Generation has stated that it will no longer fuel the plant with coal."

The New York PSC on Sept. 16 separately approved a September 2015 petition from Greenidge Generation for a Certificate of Public Convenience and Necessity allowing it to resume the operation of Unit 4.

Did You Like this Article? Get All the Energy Industry News Delivered to Your Inbox

Subscribe to an email newsletter today at no cost and receive the latest news and information.

 Subscribe Now


Shell Leverages Data to Transform from Reactive to Predictive Operations

This 6-page report describes how Shell engaged in a massive project with OSIsoft to transform the...

Selection, Use, Care and Maintenance of FR Clothing

For industries operating in an inherently dangerous environment, the importance of selecting the ...

Evolution or Revolution: IT / OT convergence means a world of possibilities

The oil and gas industry is experiencing a rapid paradigm shift in regards to digital transformat...

Predict, Prescribe, Profit: Creating a World that Doesn't Break Down

What are you doing to reduce unplanned downtime at your plant? Equipment breakdowns and process i...

Latest PennEnergy Jobs

PennEnergy Oil & Gas Jobs