Puget Sound Energy hydropower project reopens after overhaul

One of the Pacific Northwest's oldest power plants, the historic Snoqualmie Falls Hydroelectric Project, is once again producing electricity for local homes and businesses following a three-year overhaul.

Puget Sound Energy's 102-year-old Plant 2 powerhouse at Snoqualmie Falls, idled in June 2010, last week restarted commercial generation of electricity. Located about a quarter mile downstream from the falls, the plant underwent near-total reconstruction under a new, 40-year federal operating license.

The energy site's Plant 1 powerhouse — just upstream from the falls in a bedrock cavity almost 270 feet underground — also is getting a comprehensive makeover. Built in 1898-99, the older powerhouse is scheduled to resume generating hydropower in July.

Once Plant 1 comes online this summer, Snoqualmie Falls' generating capacity will be 54 MW, compared to about 44 MW previously. The increased output, enough to serve about 40,000 homes, is being achieved through greater plant efficiencies; no additional water will run through the project's seven turbines.

Upgrades made at Plant 2 include:

·      A new steel and concrete intake structure along the river's edge for channeling water into a 1,215-foot-long underground tunnel that runs beneath the Salish Lodge and the upper portion of Snoqualmie Falls Park;

·      Relining of the 12-foot-diameter, underground tunnel;

·      A new Gate House that controls water flow from the tunnel to large, above-ground pipes, or "penstocks," which carry the water more than 1,100 feet down a steep hillside to the Plant 2 powerhouse;

·      One new, 7-foot-diameter penstock and one upgraded penstock for delivering water to Plant 2;

·      A completely rebuilt powerhouse building, reflecting the original structure's design;

·      A new, 13.7 MW turbine-generator, replacing the plant's original, 1910 turbine (the plant's 1957-vintage, 26.5-MW turbine-generator remains in use); and

·      A new bypass flow-control system, housed inside the new powerhouse, for ensuring public safety and maintaining consistent downstream flows for fish if an emergency shutdown of power generation were to occur.

Puget Sound Energy serves 1.1 million electric customers and more than 760,000 natural gas customers in 10 counties.

Did You Like this Article? Get All the Energy Industry News Delivered to Your Inbox

Subscribe to an email newsletter today at no cost and receive the latest news and information.

 Subscribe Now

Whitepapers

Maximizing Operational Excellence

In a recent survey conducted by PennEnergy Research, 70% of surveyed energy industry professional...

Leveraging the Power of Information in the Energy Industry

Information Governance is about more than compliance. It’s about using your information to drive ...

Reduce Engineering Project Complexity

Engineering document management presents unique and complex challenges. A solution based in Enter...

Revolutionizing Asset Management in the Electric Power Industry

With the arrival of the Industrial Internet of Things, data is growing and becoming more accessib...

Latest PennEnergy Jobs

PennEnergy Oil & Gas Jobs