ACT20P-Bridge signal converter/isolator is designed for process and factory load-cell applications that include engine and turbine strain measurement or weight and level controls.
Unlike bulky electronics systems, these compact DIN-rail-mountable instruments are easy to set up and use. They deliver 65-ms response time (10-90%) and 0.05% accuracy.
If a different load cell is required for a new application, P-Bridge offers switch-selectable input and output ranging with simple on-site pushbutton calibration. All this is easily accessible behind the unit’s front cover.
You can integrate the signal converter/isolator into the load controls. This allows you to operate and feed an external relay input before each measurement to subtract the “tare” weight. And, simple calibration can be performed on-site via pushbutton or a signal from the PLC. Complete ACT20P-Bridge details are free.
821 Southlake Boulevard, Richmond VA 23236
For Additional Weidmuller Details: http://buyersguide.pennenergy.com/Search/SearchResult.aspx?pub=1013&pg=1&sid=0&st=Weidmuller&type=0&ctry=0
Offshore Articles Archives
View Oil and Gas Articles on PennEnergy.com