DCMS downhole corrosion monitoring system tools are shown and described in this free datasheet. They deliver real-time corrosion and temperature information in hostile downhole conditions.
System sensitivity is cited to enable evaluation of inhibitors’ film persistence in actual operating conditions.
DCMS is attachable to a variety of wireline-approved running tools. It inserts into a production well at the start of testing and retrieved at the end of the testing.
Selection of the appropriate wireline tools allows DCMS to be set at any required depth — wherever the most critical corrosion regions are located. Several tools may be run simultaneously to obtain corrosion data for different depths while under the same operating conditions.
DCMS is rated to 10,000 psi and 285°F.
Rohrback Cosasco Systems
11841 East Smith Avenue, Santa Fe Springs CA 90670
For Free Downhole Corrosion Monitor Tools Info: http://ogpe.hotims.com/r5/search.asp?action=search&return_by_category=n&order_by=a&searchstring=Rohrback