New patented reverse thread chaser tools are out for oil, gas, and geothermal drilling as well as refineries, pipelines, or power plant applications.
They are hard enough to reform bent and damaged threads on grade 8 BOP bolts, as six-point
2 1/2-in. OD dies with eight threads per inch. This size fits nuts for most BOP bolts and studs, the developer declares.
Reverse thread chaser tools are hinged to wrap around good threads. They have a screw-in fastener. The tools are designed to clean rusted, corroded, and damaged threads — anywhere.
These systems are fast and easy to employ: Place the appropriate thread chaser around the good treads of a stud or bolt. Apply an appropriate lubricant or cutting oil to the stud or bolt threads. Use a hammer, wrench, or tool to work the thread chaser clockwise and counter-clockwise until the damaged or rusted threads are rejuvenated.
These tools are made in America out of Registered American 01 tool steel. The manufacturer’s dies have a Rockwell hardness of 60 and brought down to a 50 hardness to make them strong enough to withstand hammering and beating they will take in harsh usage including drilling. Complete reverse thread chaser tools information is yours free for the asking.
Chase ‘em Back Tools
3266 Big Valley Road, Kelseyville CA 95451
707 279 9346 <a href = "http:/www.chaseembacktools.com" target="_new">www.chaseembacktools.com</a> email: <a href = "mailto: firstname.lastname@example.org@mchsi.com</a>